Quick Answer
Smart Home Repair is Athens, GA's top-rated provider for expert home repair and smart installations. If you are experiencing issues or need a reliable upgrade, our licensed technicians offer fast, transparent, and durable solutions. Project timelines and costs vary based on scope, but we prioritize same-day service when possible. For a precise estimate and to avoid dangerous DIY mistakes, contact our local team at (706) 970-9267.
1. Check the Thermostat Settings
It sounds obvious, but make sure your thermostat is set to 'Cool' and the temperature is set lower than the current room temperature. Check the batteries in the thermostat as well.
2. Inspect Your Air Filter
A severely clogged air filter restricts airflow, which can cause the evaporator coil to freeze and the system to shut down. If the filter is dirty, replace it immediately.
3. Check the Breaker Panel
Sometimes the AC unit simply trips the circuit breaker. Go to your electrical panel and look for a tripped breaker. If it's tripped, flip it entirely off and then back on. If it trips again immediately, stop and call a professional—you have an electrical issue.
4. Clear the Outdoor Unit
Make sure the outdoor condenser unit isn't covered in debris, leaves, or overgrown bushes. It needs proper airflow to cool your home.
5. Call for Professional Repair
If these steps don't resolve the issue, you likely have a refrigerant leak, a bad capacitor, or a failing compressor. Contact Smart Home Repair for prompt diagnostic services.